Full electronic equipment retrofit package for your machine is available. The package includes: a different model new/used CNC, new servo drive, new cabling and machine interface. Upon receiving your old equipment this service takes 5-7 business days and you get your Plug-N-Play version by mail. This way of delivery and our free technical support make our service truly cost-effective. This service is recommended for machines in good mechanical condition and available software under EIA or ESSI communication protocol software. One year manufacturer’s warranty.

Full electronic equipment retrofit package for your machine is available. The package includes: a different model new/used CNC, new servo drive, new cabling and machine interface. Upon receiving your old equipment this service takes 5-7 business days and you get your Plug-N-Play version by mail. This way of delivery and our free technical support make our service truly cost-effective. This service is recommended for machines in good mechanical condition and available software under EIA or ESSI communication protocol software. One year manufacturer’s warranty.

Repair of your Hybrid D6 CNC Control is available - 90% same-day repair.

Retrofit of your Hybrid D6 CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving of your old equipment. One year manufacturer’s warranty.

We buy old Hybrid D6 Controls - working or not (complete set).

Repair of your Micropath 16K CNC Control is available - 90% same-day repair.

Retrofit of your Micropath 16K CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving of your old equipment. One year manufacturer’s warranty.

We buy old Micropath 16K Controls - working or not (complete set).

Repair of your Compupath 500 or Compupath 550 CNC Control is available - 90% same-day repair.

Retrofit of your Compupath 500 or Compupath 550 CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving of your old equipment. One year manufacturer’s warranty.

We buy old Compupath 500 and Compupath 550 Controls - working or not (complete set).

Repair of your Aircotron 750 CNC Control is available - 90% same-day repair.

Retrofit of your Aircotron 750 CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving of your old equipment. One year manufacturer’s warranty.

We buy old Aircotron 750 Controls - working or not (complete set).

Repair of your Hybrid D11 CNC Control is available - 90% same-day repair.

Replacement with new Picopath CNC Control – Plug-N-Play version that fully matches your machine interface, cabling, servo drive, and software. One year manufacturer’s warranty.

Repair of your Micropath CXNC CNC Control is available - 90% same-day repair.

Retrofit of your Micropath CXNC CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving your old equipment. One year manufacturer’s warranty.

Replacement with new Picopath CNC Control – Plug-N-Play version that fully matches your machine interface, cabling, servo drive, and software. One year manufacturer’s warranty.

We buy old Micropath CXNC Controls - working or not (complete set).

Repair of your Micropath Plus and Micropath Plus Excalibur CNC Control is available - 90% same-day repair.

Retrofit of your Micropath Plus and Micropath Plus Excalibur CNC Control is available. The package includes brand new electronics in your old box with your own firmware. This is a low-cost Plug-N-Play version that fully matches your machine’s cabling, interface and software. Free technical support and by mail delivery within 3-4 business days upon receiving of your old equipment.

Replacement with new Picopath CNC Control – Plug-N-Play version that fully matches your machine interface, cabling, servo drive, and software. One year manufacturer’s warranty.

We buy old Micropath Plus and Micropath Plus Excalibur Controls - working or not (complete set).

Repair of your Picopath CNC Control is available - 90% same-day repair.

Replacement with new Picopath CNC Control – Plug-N-Play version that fully matches your machine interface, cabling, servo drive, and software. One year manufacturer’s warranty.

Replacement with new Picopath CNC Control, CHICHOinc. DC servo drive, interface and cabling set (made at our location). You get it by mail and install it yourselves with our free technical support or we come and install it for you. One year manufacturer’s warranty.

Repair of your Promotion CNC Control is available.

Replacement with new Promotion CNC Control. One year manufacturer’s warranty.

Repair of your Lynx CNC Control is available - 90% same-day repair.

Replacement with new Picopath CNC Control, CHICHOinc. Station-Control Console, CHICHOinc. DC servo drive (if your Lynx includes servo drive), interface and cabling set (made at our location). You get it by mail and install it yourselves with our free technical support or we come and install it for you. One year warranty.

For HVAC Cutting machines we support, repair or replace CNC controls of other manufacturers as well. Contact our representatives.

We repair all Wescan Servo Drives, optical tracers and machine interfaces.

For most of Wescan servo drives we offer 2 or 3 axes DC servo drives with or without dual gantry synchronized system (synchronized drive).

We offer a retrofit package for most of 2 axes Wescan Servo drives – Plug-N-Play version.

To improve the quality of your machine we upgrade 2 axes Wescan Servo drives to 3 axes encoder synchronized system. The latter requires an addition of an extra active axis on the slave side of your machine gantry.

We offer upgrade of 3 axes servo drive with resolvers synchronized system to 3 axes encoder synchronized system.

We repair all Linatrol Servo Drives, optical tracers and machine interfaces.

For most of Linatrol servo drives we offer 2 or 3 axes DC servo drives with or without dual gantry synchronized system (synchronized drive).

We offer a retrofit package for most of 2 axes Wescan Servo drives – Plug-N-Play version.

To improve the quality of your machine we upgrade 2 axes Linatrol Servo drives to 3 axes encoder synchronized system. The latter requires an addition of an extra active axis on the slave side of your machine gantry.

We offer upgrade of 3 axes servo drive with resolvers synchronized system to 3 axes encoder synchronized system.

Same day repair available for 95% of HL 71 servo drives.

HL71 electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

We buy old HL 71 servo drives (working or not working).

Same day repair available for 95% of HL 71B servo drives.

HL71 B electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

We buy old HL 71B servo drives (working or not working).

Same day repair available for 95% of HL 71LF servo drives.

HL71 LF electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

We buy old HL 71LF servo drives (working or not working).

Same day repair available for 95% of ESAB servo drives.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

Same day repair available for 95% of HL75 servo drives.

HL75 electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

To improve the quality of your machine we upgrade 2 axes servo drive to 3 axes synchronized drive with encoders and we add an extra dual gantry axis.

We buy old HL75 servo drives (working or not working).

Same day repair available for 95% of HL752 servo drives.

HL752 electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 2 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

To improve the quality of your machine we upgrade 2 axes servo drive to 3 axes synchronized drive with encoders and we add an extra dual gantry axis.

We buy old HL752 servo drives (working or not working).

Same day repair available for 95% of HL76 servo drives.

HL76 electronic retrofit package. It includes exchange of the electronic boards and assemblies with CHICHOinc. DC servo drive modules – brand new electronics in your old box – The retrofit takes 2-3 business days upon receiving your old equipment; we send you back your new equipment, Plug-N-Play version by mail. One year manufacturer’s warranty.

Full replacement with 3 axes CHICHOinc. Servo drive – Plug-N-Play version. One year manufacturer’s warranty.

To improve the quality of your machine we upgrade 3 axes resolver synchronized system to 3 axes synchronized drive with encoders.

We buy old HL76 servo drives (working or not working).

HL 75/76 is a 2 or 3 axes servo drive system of Linatrol. See above 2 or 3 axes of HL 75 or HL 76.

Same day repair available for all DACC AccuDrive.

Full replacement with 2 or 3 axes CHICHOinc. Servo DC drive – Plug-N-Play version. One year manufacturer’s warranty.

For HVAC Cutting machines we support, repair or replace servo drives of other manufacturers as well. Contact our representatives.

We repair these devices.

We replace these devices.