New Production Line

Contact Information

(24/7 Free Technical Support)

(225) 772-8326

(8am - 5pm central time)

(225) 364-2685

(225) 364-2870

1887 Stafford Dr.
Baton Rouge, LA 70810


Complete replacement for Hybrid D6 / CXNC / 128K/LF ( Creonics ) and MPP128K/LF ( Allen Bradley ) mostly for Lockformer machines with PICOPATH 2M CNC



PICOPATH 2M - CNC Controller (2 X 37 pin metal connector-one male and one female)

Picopath Hybrid D11 CNC
More Pictures

This product has been developed and it is being manufactured by Linatrol and Chicho, Inc.

Contact Linatrol ( or Chicho,Inc. for more information.  



PICOPATH 2M - CNC Controller (2 X 37 pin metal connector-one male and one female)it is NOT a Plug & Play controller (custom made machine cable set needed).  This CNC can be used on the following types of machines and their business applications:

  • Vulcan Plasma Cutter , Vulcan Plasma Cutters , Flame Cutters , Plasma Cutting Machine , Plasma Cutting Machines ,  Vulcan Plasma Machine , Vulcan Plasma Machines , Vulcan Plasma Cutting System , Vulcan Plasma Cutting Systems , Plasma Table , Plasma Vulcan Cutting Table ,  HVAC  Plasma Table , Lockformer Plasma Table, PPI PPIDuct  Production Products Plasma Pro , PPI PPIDuct  Production Products Liner Pro  , PPI PPIDuct  Production Products Combo , DACC Industries , Shape Tech , Advanced Cutting Systems  Ductmaster  , Koike Aronson Ductmaster , and their Fabmaster .


PICOPATH 2M - CNC Controller (2 X 37 pin metal connector-one male and one female)it is NOT a Plug & Play controller (custom made machine cable set needed).  This CNC can be used on the following machine models* :

  • Lockformer Vulcan 1200 , Lockformer Vulcan 1800 , Lockformer Vulcan 2000 , Lockformer Vulcan 2405 , Lockformer Vulcan 2900 , Koike Aronson DM510 , Koike Aronson PM510 , Advanced Cutting Systems Ductmaster 510 , Advanced Cutting Systems Fabmaster  510 , I-Plasma , I-Liner , I-Combo ,  AccuPlasma , AccuLiner , Plasma Pro , Liner Pro , Combo , Gator , Old models of ESAB burning tables , and MG Cutting Machines and more with MICROPATH CREONICS ALLAN BRADLEY CNC Strategy.



Note ***:  Some manufacturers made the same machine models using different CNC controls.  For example: Lockformer offers their Vulcan 1800 machine built or upgraded with different controls : MICROPATH MPP CNC or PICOPATH  CNC. Lockformer Vulcan 2900 with: NEE CNC control; MICROPATH MPP CNC control; and PICOPATH CNC control.  Advanced Cutting Systems built their Ductmaster 510 and Fabmaster 510 with HYBRID D11 or MICROPATH MPP CNC controls. The same goes for Koike Aronson with their PM510 and DM510 models.

If your machine is not built with MICROPATH MPP CNC strategy please find your Chicho, Inc. replacement CNC control under the CNC control models ( NEE CNC  Control  ,  HYBRID D11 , or  PICOPATH CNC control) listed on our website or contact us for  assistance identifying your controller.



This CNC control is with custom made machine cable set (different depending on the machine it will be used on).  The PICOPATH 2M CNC control can replace any two axes CNC control (except EXCALIBUR– because it has an extra knife rotation head axis, North East Electronics NEE CNC control – because it has a servo drive and machine interface already built in).     

The PICOPATH 2M CNC control can replace directly Hybrid D11, and Picopath CNC (with 2X37 pin metal connectors)controls.  With these types of CNC controls there is no need for the custom made machine cables, and there are no extras needed in the PICOPATH 2M unit to replace them.      




  • This CNC control is NOT Plug & Play.  It needs custom made machine cables *, and in some cases needs extras built in*, depending on the applications it will be used for (most machines built after 2004 by Advanced Cutting Systems, Production Products, and DACC Industries, with PICOPATH CNC controls need extras built in the new controller  for it to be Plug and Play for these machines).
  • This CNC control has 256K memory.  That helps with downloading and cutting files larger than 128K.
  • Complete replacement for all MICROPATH CNC controls: Vulcan Hybrid D6 097* , Vulcan Hybrid D6  / CXNC / 128K/LF * , ESAB Compupath 500* ,  Compupath 550* ,  Compupath 750* , Aircotron 750* , Aircotron 1000* , Aircotron 3000* , CMC Burny 2* , Burny 2.5* ,  ( Creonics ) , MPP128K/LF* , MICROPATH  MPP 256K* , PICOPATH **,  Hybrid D11  (Allen Bradley) and other  CNC controllers (contact us for information on the other controls).
  • One year manufacturing warranty, plus future 24/7 free over the phone technical support for your equipment, machine (s).
  •  Approximately 2-3 business days lead time if not in stock.



Part # for this item:  PICOPATH 2M





Price for new unit:


$8,250.00 (CNC unit)                            Ask us how to purchase this product with 10% discount                    $7,425.00


$850.00 (1 tool custom cable set)      Ask us how to purchase this product with 10% discount                   $765.00


Price for upgrade of old controller:  contact us


*** additional  $175.00 per tool cable added to the set.***


  • Purchases are paid C.O.D. 
  • If we receive your old equipment and we determined it can be repaired and/or updated, we will notify you of this option.  Repairs often cost half the price of new equipment and come with our same 12 month warranty.
  • If you want to purchase this product with different terms, please call your local or main distributor. 
  • For International buyers please contact us for details and instructions.
  • To purchase this product please contact us with your company information and a Purchase Order.  If you are not sure what type and model equipment you need, please contact us for more information and assistance.